Linksys WAG54GS Uživatelský manuál stáhnout pdf (Strana 10)

Chapter 4

Advanced Configuration

Wireless-G ADSL Gateway with SpeedBooster

will automatically re-establish your connection. To use

this option, select Keep Alive. In the Redial Period field,

you specify how often you want the Gateway to check

the Internet connection. The default Redial Period is

30 seconds.

RFC 1483 Routed

If you are required to use RFC 1483 Routed, then select

RFC 1483 Routed.

Internet Connection Type > RFC 1483 Routed

IP Settings

Your ISP provides these settings.

Internet IP Address Enter the Gateway’s IP address, as

seen from the Internet.

Subnet Mask Enter the Gateway’s Subnet Mask, as seen

from the Internet (including your ISP).

Default Gateway Enter the IP address of the ISP server.

Primary (Required) and Secondary (Optional)

DNS Enter the DNS (Domain Name System) server IP

address(es) provided by your ISP. At least one is required.

IPoA

If you are required to use IPoA (IP over ATM), then select

IPoA.

Internet Connection Type > IPoA

IP Settings

Your ISP provides these settings.

Internet IP Address Enter the Gateway’s IP address, as

seen from the Internet.

Subnet Mask Enter the Gateway’s Subnet Mask, as seen

from the Internet (including your ISP).

Default Gateway Enter the IP address of the ISP server.

Primary (Required) and Secondary (Optional)

DNS Enter the DNS (Domain Name System) server IP

address(es) provided by your ISP. At least one is required.

RFC 1483 Bridged

If you are required to use RFC 1483 Bridged, then select

RFC 1483 Bridged.

Internet Connection Type > RFC 1483 Bridged

IP Settings

Select Obtain an IP Address Automatically if your ISP

says you are connecting through a dynamic IP address.

If you are required to use a permanent (static) IP address

to connect to the Internet, then select Use the following

IP Address. Your ISP provides the settings needed for the

following fields:

Internet IP Address Enter the Gateway’s IP address, as

seen from the Internet.

Subnet Mask Enter the Gateway’s Subnet Mask, as seen

from the Internet (including your ISP).

Default Gateway Enter the IP address of the ISP server.

Primary (Required) and Secondary (Optional)

DNS Enter the DNS (Domain Name System) server IP

address(es) provided by your ISP. At least one is required.

Bridge Mode Only

If you are using your Gateway as a bridge, which makes

the Gateway act like a stand-alone modem, select Bridge

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

Komentáře k této Příručce

Žádné komentáře

Linksys WAG54GS Uživatelský manuál Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Hardware Linksys WAG54GS