Linksys RV082 Uživatelský manuál Strana 74
- Strana / 105
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
65
Appendix A: Troubleshooting
Common Problems and Solutions
10/100 8-Port VPN Router
For Windows 2000:
A. Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections.
B. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and
select the Properties option.
C. In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and
click the Properties button. Select Use the following IP address option.
D. Enter a unique IP address that is not used by any other computer on the network connected to the Router.
You can only use an IP address in the ranges 192.168.1.2 to 192.168.1.99 and 192.168.1.151 to
192.168.1.254.
E. Enter the Subnet Mask, 255.255.255.0.
F. Enter the Default Gateway, 192.168.1.1 (Router’s default IP address).
G. Toward the bottom of the window, select Use the following DNS server addresses, and enter the
Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its
website to find the information.
H. Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the
Local Area Connection Properties window.
I. Restart the computer if asked.
For Windows XP:
The following instructions assume you are running Windows XP with the default interface. If you are using the
Classic interface (where the icons and menus look like previous Windows versions), please follow the
instructions for Windows 2000.
A. Click Start and Control Panel.
B. Click the Network and Internet Connections icon and then the Network Connections icon.
C. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and
select the Properties option.
D. In the This connection uses the following items box, highlight Internet Protocol (TCP/IP). Click the
Properties button.
E. Enter a unique IP address that is not used by any other computer on the network connected to the Router.
You can only use an IP address in the ranges 192.168.1.2 to 192.168.1.99 and 192.168.1.151 to
192.168.1.254.
F. Enter the Subnet Mask, 255.255.255.0.
G. Enter the Default Gateway, 192.168.1.1 (Router’s default IP address).
H. Toward the bottom of the window, select Use the following DNS server addresses, and enter the
Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its
website to find the information.
I. Click the OK button in the Internet Protocol (TCP/IP) Properties window. Click the OK button in the Local
Area Connection Properties window.
- 10/100 8-Port 1
- Copyright and Trademarks 2
- How to Use this Guide 2
- Table of Contents 3
- Appendix H: Glossary 89 5
- List of Figures 6
- Chapter 1: Introduction 10
- What’s in this Guide? 11
- Chapter 2: Networking Basics 13
- Why do I need a VPN? 14
- What is a VPN? 15
- VPN Router to VPN Router 16
- The Front Panel 17
- The Back Panel 18
- Overview 19
- Connection Instructions 20
- DHCP Tab 22
- System Management Tab 22
- Port Management Tab 23
- Firewall Tab 23
- System Summary Tab 24
- Configuration 25
- Port Statistics 25
- Network Setting Status 25
- Firewall Setting Status 26
- VPN Setting Status 26
- Log Setting Status: 26
- Setup Tab - Network 27
- Static IP 28
- Transparent Bridge 29
- Heart Beat Signal 29
- Setup Tab - Time 30
- Setup Tab - DMZ Host 31
- Setup Tab - Forwarding 31
- Port Range Forwarding 32
- Port Triggering 32
- Setup Tab - UPnP Page 33
- Setup Tab - One-to-One NAT 33
- Setup Tab - MAC Clone 34
- Setup Tab - DDNS 34
- Setup Tab - Advanced Routing 35
- Static Routing 36
- DHCP Tab - Setup 37
- DHCP Tab - Status 38
- Bandwidth 39
- Protocol Binding 39
- System Management Tab - SNMP 40
- DNS Name Lookup 41
- Firmware Upgrade 42
- Firmware Download 42
- Import Configuration File: 43
- Export Configuration File: 43
- Basic Per Port Config 43
- Firewall Tab - General 45
- Firewall Tab - Access Rules 46
- Add a New Access Rule 47
- Editing an Access Rule 48
- Forbidden Domains 48
- Website Blocking by Keywords 48
- Scheduling 48
- VPN Tab - Summary 49
- GroupVPN Status: 50
- VPN Clients Status: 50
- VPN Tab - Gateway to Gateway 51
- Remote Group Setup: 52
- IPSec Setup 53
- Advanced 55
- VPN Tab - Client to Gateway 56
- Local Group Setup 57
- VPN Tab - VPN Client Access 63
- VPN Tab - VPN Pass Through 64
- VPN Tab - PPTP Server 64
- Log Tab - System Log 65
- Log Tab - System Statistics 66
- Wizard Tab 67
- Access Rule Setup 69
- Support Tab 72
- Logout Tab 72
- Appendix A: Troubleshooting 73
- For Windows 2000: 74
- For Windows XP: 74
- For Netscape 4.7 or higher: 80
- Frequently Asked Questions 83
- Ethernet Adapter 89
- Setting up the Router 91
- Wall-Mounting the Router 93
- Replacing a Lithium Battery 95
- Appendix G: Windows Help 97
- Appendix H: Glossary 98
- 10/100 8-Port VPN Router 100
- Appendix I: Specifications 102
Quartet TEA408 manuals
Owner’s manuals and user’s guides for Whiteboards Quartet TEA408.
We providing 1 pdf manuals Quartet TEA408 for download free by document types: Datasheet
Komentáře k této Příručce